Voice-Acoustic Debuts PA-Tower – ProSoundWeb

Voice-Acoustic Debuts PA-Tower - ProSoundWeb

By PSW Staff February 20, 2019

North German loudspeaker manufacturer Voice-Acoustic has introduced the PA-Tower. Top priority of the development was a discreet and gala-suitable appearance, a small footprint, a transport solution optimized for truck loading dimensions and quick assembly and dismantling.

The load capacity indoors without dynamic load (solid ground, no wind) is up to 400 kg. Outdoor, the PA-Tower can carry 300 kg up to a maximum wind force of 15 m/sec with a max wind attack area of 1.5 m².

All parts are powder coated in black. No construction book is required due to the maximum height of 5 meters and the included stability certificate is sufficient. The mast can be erected by only one person by means of a detachable erecting aid and a 900 kg Al-Ko hand winch. The deflection pulleys also permit the use of an electric chain motor, which can be attached to the bottom of the base.

The prescribed securing of the load does not take place at the top of the tower, but comfortably at ground level. For this purpose, the steel cable of the secondary safety device is guided downwards via a second pair of deflection pulleys. The safety cable runs parallel behind the suspension cable and thus prevents the loudspeakers from twisting and can also be used for vertical alignment.

The required minimum footprint is only 164 x 132 cm. The transport case has a footprint of 120 x 60 cm. The Voice-Acoustic PA-Tower is manufactured by H.O.F Alutec. The PA-Tower will be jointly presented at Prolight+Sound Messe Frankfurt and can be seen at Voice-Acoustic booth E76 in hall 8 and at H.O.F Alutec booth E49 in hall 12.

Voice-Acoustic

Tagged with:

Subscribe to Live Sound International

Subscribe to Live Sound International magazine. Stay up-to-date, get the latest pro audio news, products and resources each month with Live Sound.



Source link

LEAVE A REPLY

Please enter your comment!
Please enter your name here